Tunneling mode

  • 1
  • Question
  • Updated 2 years ago
Hi Everyone. Newbie here. I have zone director 3050 and zf AP. AP’s are located in different locations (branch offices) (routed). ZD is at main office. Client want the vlan in main office to be obtained by users located in branch offices. Can sameone help me please.
Photo of Jhon Ryan Banaag

Jhon Ryan Banaag

  • 1 Post
  • 0 Reply Likes

Posted 2 years ago

  • 1
Photo of Erjohn Bernal

Erjohn Bernal

  • 4 Posts
  • 4 Reply Likes
UP, Same issue here.
Photo of Jardel Almeida

Jardel Almeida

  • 50 Posts
  • 4 Reply Likes

If the VLAN is in the Array, I believe the ZD should be too.

So, configure your ZD in the array, its switch, and dhcp. Create this wlan in the ZD, and associate this VLAN in the WLAN. The APs will work with local IP, however, clients will receive IP from the VLAN of the array.