Hi, I am an engineer at KRFTSNAB ALC from the Republic of Belarus. We are theHere is an example of how a session report is generated when a subscriber connects through the Ruckus access point:
first to test Ruckus products in the laboratory of our national telecommunications operator Beltelecom. Help solve the problem with DHCP Option 82 Remote ID Format. Our Republican Wi-Fi network is built on Cisco Prime Infrastructure.
Fri Nov 9 12:19:34 2018
Acct-Session-Id = "15/0/1/533_039CF289"
Framed-Protocol = PPP
Cisco-Service-Info = "NINTERNET-FREE"
Cisco-AVPair = "parent-session-id=15/0/1/533_039CEB3D"
Acct-Input-Packets = 22640
Acct-Output-Packets = 28217
Acct-Input-Octets = 2076866
Acct-Output-Octets = 38086686
Cisco-Control-Info = "I0;2076866"
Cisco-Control-Info = "O0;38086686"
Framed-IP-Address = 100.97.33.16
User-Name = "[email protected]"
Acct-Session-Time = 900
Acct-Terminate-Cause = Session-Timeout
Cisco-AVPair = "disc-cause-ext=Session Timeout"
Acct-Status-Type = Stop
Calling-Station-Id = "acc1.ee43.e079"
NAS-Port-Type = Ethernet
NAS-Port = 533
NAS-Port-Id = "15/0/1/533"
Cisco-AVPair = "vendor-class-id-tag=android-dhcp-6.0.1"
Cisco-AVPair = "circuit-id-tag=WLAN:wlan33:533:TestBELTELECOM2:R510:RuckusAP:34:8F:27:2B:30:50"
Cisco-AVPair = "remote-id-tag=348f272b30503a5465737442454c54454c45434f4d32"
Service-Type = Framed-User
NAS-IP-Address = 172.26.11.6
Event-Timestamp = "Nov 9 2018 12:19:34 +03"
NAS-Identifier = "a1k-wifi-2"
Acct-Delay-Time = 0
Acct-Unique-Session-Id = "a7f968bb77b7e91a"
Stripped-User-Name = "375333646000"
Realm = "free"
Timestamp = 1541755174
remote-id is not displayed correctly
This is how it should be displayed correctly:
Fri Nov 9 12:19:50 2018
Acct-Session-Id = "15/0/1/913_039C5EA0"
Cisco-Service-Info = "NINTERNET-UN"
Framed-Protocol = PPP
Framed-IP-Address = 100.105.207.210
Cisco-AVPair = "parent-session-id=15/0/1/913_039C5913"
User-Name = "[email protected]"
Cisco-Control-Info = "I0;9246354"
Cisco-Control-Info = "O0;303569793"
Acct-Input-Packets = 92810
Acct-Output-Packets = 226940
Acct-Input-Octets = 9246354
Acct-Output-Octets = 303569793
Acct-Session-Time = 3638
Acct-Status-Type = Interim-Update
Calling-Station-Id = "241f.a0ad.fde1"
NAS-Port-Type = Ethernet
NAS-Port = 913
NAS-Port-Id = "15/0/1/913"
Cisco-AVPair = "circuit-id-tag=00000000"
Cisco-AVPair = "remote-id-tag=e8edf31ba050:BELTELECOM"
Cisco-AVPair = "vendor-class-id-tag=dhcpcd-5.5.6"
Service-Type = Framed-User
NAS-IP-Address = 172.26.11.6
Event-Timestamp = "Nov 9 2018 12:19:50 +03"
NAS-Identifier = "a1k-wifi-2"
Acct-Delay-Time = 0
Acct-Unique-Session-Id = "c2d234f2ebfba5be"
Realm = "beltel.by"
Timestamp = 1541755190
I think the problem is in Hex format. For Cisco, you need to use ASCII, is it possible to enable this feature on the ZD 3000?
This is a very important part of testing that will allow you to sell Ruckus products to expand the Wi Fi network in our country.