T310C Rejected by SZ100 ACL

  • 1
  • Question
  • Updated 6 months ago
  • (Edited)
Hi all, I'm experiencing ACL rejecting issues of a new T310c im trying to add to a SZ100. 

Below is the error im seeing on the event logs.

model [T310C] is not being upgraded with SmartZone AP firmware because of ACL setting.

I have tried the below with no luck.

sz100# conf 

sz100(config)# lwapp2scg

sz100(config-lwapp2scg)# policy accept-all


Anything else i can try. 


Thanks

Photo of Skaap2.0

Skaap2.0

  • 30 Posts
  • 2 Reply Likes

Posted 6 months ago

  • 1
Photo of pilot1199

pilot1199

  • 14 Posts
  • 3 Reply Likes
AP firmware? 
Photo of Martin

Martin, Official Rep

  • 309 Posts
  • 79 Reply Likes
Please first provide the firmware used on the SZ100 controller and also from the AP.

Regards
Martin

Photo of Skaap2.0

Skaap2.0

  • 30 Posts
  • 2 Reply Likes
Sz100 Firmware version 3.6.2.0.78
AP T310c Firmware version 108.0.0.771
Photo of Martin

Martin, Official Rep

  • 309 Posts
  • 79 Reply Likes
Hi Skaap

So disable the lwapp2scg as that is for older firmware (zd based) and use the set scg ip x.x.x.x or the set director ip x.x.x.x and the AP will connect to the controller.
The 10x.x.x.x firmware has both clients in there (ZD and SZ), and you need to use the SZ client to connect to the controller.

Regards
Martin

Photo of Skaap2.0

Skaap2.0

  • 30 Posts
  • 2 Reply Likes
Tried that, also doesn't seem to work the SZ sees the AP, but rejects it.
2018/12/11 14:50:14
2003
ZD AP rejected
Warning
ZD-AP [60:D0:2C:23:9D:30] / [171803000705] model [T310C] is not being upgraded with SmartZone AP firmware because of ACL setting.
2018/12/11 14:49:17
2003
ZD AP rejected
Warning
ZD-AP [60:D0:2C:23:9D:30] / [171803000705] model [T310C] is not being upgraded with SmartZone AP firmware because of ACL setting.
2018/12/11 14:49:12
2003
ZD AP rejected
Warning
ZD-AP [60:D0:2C:23:9D:30] / [171803000705] model [T310C] is not being upgraded with SmartZone AP firmware because of ACL setting.
2018/12/11 14:49:07
2003
ZD AP rejected
Warning
ZD-AP [60:D0:2C:23:9D:30] / [171803000705] model [T310C] is not being upgraded with SmartZone AP firmware because of ACL setting.
2018/12/11 14:49:02
2003
ZD AP rejected
Warning
ZD-AP [60:D0:2C:23:9D:30] / [171803000705] model [T310C] is not being upgraded with SmartZone AP firmware because of ACL setting.
2018/12/11 14:48:57
2003
ZD AP rejected
Warning
ZD-AP [60:D0:2C:23:9D:30] / [171803000705] model [T310C] is not being upgraded with SmartZone AP fir
Photo of Paul McGuire

Paul McGuire

  • 19 Posts
  • 11 Reply Likes
Do you have an available license in SZ for the AP?
Photo of Skaap2.0

Skaap2.0

  • 30 Posts
  • 2 Reply Likes
Yes, 1x License available added it for this extra outdoor AP.
Photo of Skaap2.0

Skaap2.0

  • 30 Posts
  • 2 Reply Likes
Could it be a bug in the firmware?

Photo of Martin

Martin, Official Rep

  • 309 Posts
  • 79 Reply Likes
No it is not Skaap.

Can you just open a ticket with support and we check it out. mention the forum and my name and topic
It looks like something simple to fix.

Regards
Martin

Photo of Skaap2.0

Skaap2.0

  • 30 Posts
  • 2 Reply Likes
support case 00877181 has been opened 
Photo of Skaap2.0

Skaap2.0

  • 30 Posts
  • 2 Reply Likes
support case 00877181 has been opened 
Photo of pmonardo

pmonardo, Employee

  • 28 Posts
  • 11 Reply Likes
try upgrading the AP to version 110 and setting the SCG IP manually and see what happens.


Photo of Martin

Martin, Official Rep

  • 309 Posts
  • 79 Reply Likes
Skaap, from the case notes I understand that the zone did not have version 3.6.x assigned. The T310 is introduced at a certain software version so I presume that was the issue correct?

regards
Martin