SZ100 with ICX7750-48XGC ,,,how to connect physically

  • 1
  • Question
  • Updated 1 week ago
i am implementing a NEW SZ100 with an existing network setup ,, the Core Switch is ICX7750-48XGC with 7 stacks..

am new with Ruckus WLC as well as Ruckus Switches... 

please help me to understand its physical connectivity and Data plane communication.

am Connected first 2 ports of WLC to Core Switch ,, the LAG is created at Core with 2 ports ,,,
Port 5/1/47 and 48 ..these 2 ports are part of LAG-11

lag blue static id 11
 ports ethe 5/1/47 to 5/1/48
--------------------------------------
vlan 12 name Managment by port
 untagged lag 11



is the setup and doing is correct ??

please suggest any correction if required 




thanks,
Anvar
Photo of Lotus Administrator

Lotus Administrator

  • 3 Posts
  • 1 Reply Like

Posted 1 week ago

  • 1
Photo of Santhosh DK

Santhosh DK, Employee

  • 9 Posts
  • 1 Reply Like

HI Anvar,

 

LAG will not be supported by SZ100, there is Feature Request already to include this feature.

Kindly connect a Ethernet cable to port1 or Port2 of SZ100 to configure, please refer Quick setup and getting started Guide below.

https://ruckus-support.s3.amazonaws.com/private/documents/2817/SZ100-QuickSetupGuide-RevG-20200827.p...

https://ruckus-support.s3.amazonaws.com/private/documents/2816/SZ100-GettingStartedGuide-RevH-20200827.pdf?AWSAccessKeyId=AKIAJM3QLNNKLOV235TQ&Expires=1602882873&Signature=SuNz91%2BO0hWQHF6PmJIw5ieMImo%3D

 

Regards

Santhosh 



(Edited)