Switching off the LED on R310 Unleashed

  • 1
  • Question
  • Updated 1 month ago
  • Answered
I have a R310 Unleashed and want to switch off the LEDs on it. The lights are very distracting in the bedroom. I saw some years ago it wasn't possible.

Photo of Sasha

Sasha

  • 5 Posts
  • 0 Reply Likes

Posted 1 month ago

  • 1
Photo of Nat Chidambaram

Nat Chidambaram, Employee

  • 83 Posts
  • 31 Reply Likes
You can disable those status LEDs. Here is how to do it

1. Login using your web browser
2. Click 'Access Points '
3. Click 'Edit'
4. Go to 'Other' tab. Here you will find the check box to 'Disable Status LEDs'

Screenshots are available on our documentation http://docs.ruckuswireless.com/unleashed/200.6/GUID-1DD5279C-8BD6-4DDD-B17C-F49A2AF18689.html

-Nat

Photo of Sasha

Sasha

  • 5 Posts
  • 0 Reply Likes
Thank you for your help!
Photo of Sasha

Sasha

  • 5 Posts
  • 0 Reply Likes
Hi, I have done that. The LEDS still light up and flash. When I log in to the backend the checkbox is still ticked to disable LEDS.
Photo of Nat Chidambaram

Nat Chidambaram, Employee

  • 83 Posts
  • 31 Reply Likes
Hi Sasha,

In the 'Other' tab, you also need to choose the model of the AP listed under "Model specific control"

I just now tried and it works as expected. 



Photo of Sasha

Sasha

  • 5 Posts
  • 0 Reply Likes
Again, thank you for your help.
Photo of Sasha

Sasha

  • 5 Posts
  • 0 Reply Likes
Hi sorry again, there are lights inside the unit that flash when it is working. How can these be switched off also? Other than taking it apart and doing something like that.
Photo of Nat Chidambaram

Nat Chidambaram, Employee

  • 83 Posts
  • 31 Reply Likes
There are 5 LEDs that come with Unleashed R310 AP. When "Disable Status LEDs" is enabled I don't see any lights blinking. If you still have a problem it is time to open a Support case.