Successful L2TP Endpoint

  • 1
  • Question
  • Updated 2 years ago
Any recomend an L2TP server that will work with ruckus 9.7 APs? I have tried a couple and constantly in the logs of the AP I see that there are different protocols being used that the AP rejects.

Unsupported protocol 'Internet Protocol Control Protocol' (0x8021) received

Unsupported protocol 'Compression Control Protocol' (0x80fd) received
Photo of Jason Pearcy

Jason Pearcy

  • 23 Posts
  • 4 Reply Likes

Posted 4 years ago

  • 1
Photo of Keith - Pack Leader

Keith - Pack Leader

  • 860 Posts
  • 51 Reply Likes
Hi Jason,

Our AP's use a proprietary tunnel handshake. You'll only be able to terminate to a ZD. If you need connectivity across a public WAN, you'll need to provide the tunnel.
Photo of Jason Pearcy

Jason Pearcy

  • 23 Posts
  • 4 Reply Likes
Standalone AP managed by flexmaster. I read in a setup guide about using L2tp for management traffic. Not ZD communication.
Photo of Keith - Pack Leader

Keith - Pack Leader

  • 860 Posts
  • 51 Reply Likes
It's the same deal - you can connect to FlexMaster but not another L2TP device. You can either tunnel as above, or expose the FM server. See https://support.ruckuswireless.com/an...
Photo of Jason Pearcy

Jason Pearcy

  • 23 Posts
  • 4 Reply Likes
I think we are talking about different things at this point. Thanks for the help.
Photo of Jason Pearcy

Jason Pearcy

  • 23 Posts
  • 4 Reply Likes
If anyone else is looking to do something similar I Was able to terminate L2TP tunnels to a Cisco 2911 and pass management VLAN across the tunnel.
Photo of Marcelo Durand

Marcelo Durand

  • 1 Post
  • 0 Reply Likes

Hi Jason if you could pass along the config you used on the 2911 for the L2TP tunnels that would be great, thanks