It is possible in unleashed to assign a role of standby master to specific AP ?
- 2 Posts
- 0 Reply Likes
Posted 2 years ago
Monnat Systems, AlphaDog
- 923 Posts
- 200 Reply Likes
hi
at this time, its decided auto hence cannot be manually assigned or changed.
read here -- http://docs.ruckuswireless.com/unleashed/200.1.9.12/#t-DeployAdditionalAccessPoints.html
at this time, its decided auto hence cannot be manually assigned or changed.
read here -- http://docs.ruckuswireless.com/unleashed/200.1.9.12/#t-DeployAdditionalAccessPoints.html
Monnat Systems, AlphaDog
- 923 Posts
- 200 Reply Likes
there is another post on same topic with more info:
https://forums.ruckuswireless.com/ruckuswireless/topics/designate-master-and-standby-master
https://forums.ruckuswireless.com/ruckuswireless/topics/designate-master-and-standby-master
Nat Chidambaram, Employee
- 86 Posts
- 38 Reply Likes
Btw, in Unleashed 200.2, resiliency has gotten better. Every Member AP with Ethernet connection is a Standby AP. If Master AP goes down one these Standby APs will become Master after an election process. It takes approximately a minute or less for new Master to be elected. During this election process all "connected clients" will continue to work without any issues.
Related Categories
-
Ruckus Unleashed
- 573 Conversations
- 298 Followers