Standalone AP R500, RADIUS NSP, PEAP

  • 1
  • Question
  • Updated 2 years ago
  • (Edited)
Hello. Our company testing two AP R500 in standalone mode. I want to set up RADIUS Auth on APs with Windows 2012 NPS. But AP does auth through EAP protocol, not PEAP. I cant find where can I change it or it is impossible without controller? Please help!
Photo of Pavel Syulin

Pavel Syulin

  • 8 Posts
  • 0 Reply Likes

Posted 2 years ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 2182 Posts
  • 300 Reply Likes
Ruckus 802.1x EAP support includes PEAP. 

Under Configuration / Radio 2.4G (or 5G), and a WLAN tab, specify the Encryption Method = WPA, with the WPA Authentication of 802.1x,

and enter your Win2012 NPS server IP address, port 1812, and a Shared Secret in the Authentication Server fields.

Then when you connect a client, you'll use whatever supplicant method to enter your Userid/Password (for AD auth).
Photo of Pavel Syulin

Pavel Syulin

  • 8 Posts
  • 0 Reply Likes
Thanks for reply. I entered all fields about RADIUS server, config NPS server but it does not work. I have 8 Unifi APs with software controller and they are working with current RADIUS server and configuration. In my NPS server in log files I see that auth on ruckus is using EAP protocol instead PEAP.
(Edited)