Somewhat Tech Knowledgeable need help setting up Wlan after reset

  • 1
  • Question
  • Updated 2 months ago
I had to reset my ruckus router (long story), now I went through the setups to setup my WLAN but now I have to walk upstairs near the AP to connect to the WLAN and it says no internet. I have a AT&T modem, Ruckus Router and two APs. Please help.
Photo of Andrea Dempsey

Andrea Dempsey

  • 1 Post
  • 0 Reply Likes

Posted 2 months ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 2664 Posts
  • 368 Reply Likes
Can you plug a PC into the router with an Ethernet cable, then look at your CMD: ipconfig  output?
That should show you an IP address, network mask, default-gateway IP, and maybe DNS. 

You have to configure similar on your APs if you reset them.
(Edited)