SNMP Problem

  • 1
  • Question
  • Updated 3 years ago
  • Answered
i deployed two r600 and eight r500 APs (unleashed) in office and try to connect them in my snmp server ,only master AP connect with snmp server rest of all showing disconnected ,what was the reason further it possible to connect alll AP's with SNMP server or not?
Photo of Junaid Nawaz

Junaid Nawaz

  • 2 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 3122 Posts
  • 457 Reply Likes
The current 200.2 Unleashed provides SNMP only to the Master AP or Unleashed network's Management Interface (recommended),
for up to 4 trap receivers.

Unleashed Online help for directions on SNMP setup can be found here:

after you enable SNMP traps:

I don't have an SNMP server monitoring my little lab, but you should see at least connected/disconnected status for all APs.