Smart Mesh in Unleashed?

  • 2
  • Question
  • Updated 7 months ago
  • Answered
As I read from the release notes, the Master AP and Standby master AP can't be Mesh AP's or Ethernet-linked Mesh AP's.

Taking that into account, how many AP's minimum is needed to take advantage of mesh at all? Eth-linked Master, Eth-linked Backup Master, Eth-linked Mesh, and Mesh? Four AP's to avoid only one cabled link? Is that correct?
Photo of Tero Leskinen

Tero Leskinen

  • 5 Posts
  • 1 Reply Like

Posted 1 year ago

  • 2
Photo of Michael Brado

Michael Brado, Official Rep

  • 2114 Posts
  • 297 Reply Likes
You can mesh two Unleashed APs.  But only the wired one can/will be the Master AP.

It's recommended to have two or more wired APs, so you have failover capability in event the current Master becomes unavailable.
(Edited)
Photo of Jay Files

Jay Files

  • 27 Posts
  • 15 Reply Likes
No, that's not correct.

You could have only 1 Master (Root AP) and one Mesh AP. Only downside is, then you wouldn't have a Standby Master in that case, so no redundancy; if the Master goes down the whole network (only 2 APs in this case) would be down. 

You can also have - and I think this would be the recommended deployment - 1 Master, 1 Standby (both Root APs with wired Ethernet connection) and 1~23 Mesh APs. 

Hope that helps. 
Photo of Tero Leskinen

Tero Leskinen

  • 5 Posts
  • 1 Reply Like
OK, thanks!
That's what I thought, but the release notes got me confused :) Have to test it.
Photo of Nat Chidambaram

Nat Chidambaram

  • 58 Posts
  • 22 Reply Likes
Mesh and Smart Redundancy in Unleashed works as follows

1. For an AP to be a Master or Standby it MUST have Ethernet cable connected
2. Both Master and Standby AP or any Member AP can become a Root AP as long as they have Ethernet cable connected

If you have only two Unleashed APs in your network you can still create a Mesh network. In other words, AP with Ethernet connected will act as Master + Root AP. The AP without Ethernet cable will be a Mesh AP (piggy backing on to Master/Root AP). However, since Mesh AP has "no Ethernet" it can't be a Standby AP.
Photo of muhammad labib khairi

muhammad labib khairi

  • 11 Posts
  • 1 Reply Like
Hello, can you explain me how to configure second Unleashed AP to join the mesh from the frist one?