Setting Up Guest Network on standalone R600

  • 1
  • Question
  • Updated 2 years ago
  • Answered
Hi all,

I would like to set up a guest network on my R600 which gives internet access only and keeps certain clients off of my internal home network.

Is there a 'how to?' for this or if not, could someone help me out?

Im currently running latest standalone fw.

Thanks!
Photo of JasonS

JasonS

  • 89 Posts
  • 8 Reply Likes

Posted 2 years ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 2116 Posts
  • 297 Reply Likes
A User Guide is a good place to start.
https://support.ruckuswireless.com/documents/671-indoor-access-point-100-1-0-0-194-user-guide

If you've logged in with 'super' / 'sp-admin' explore the Configuration menus.
You can define Local Subnets, with NAT to your WAN (Internet).
You can link this Local Subnet to wireless WLANs or your 2nd Eth port.
Only give your WLAN preshare key to clients you want to access your internal home network (or local subnet).
(Edited)