Second AP is only disconnected

  • 1
  • Question
  • Updated 1 year ago
I configured the R600 as the Master AP and wanted the R500 to be joined. After upgrading the firmware to 200.1.9.12.55 it was found by the Unleashed network, but it's permanently disconnected. I made a special subnet for this case:    192.168.64.0/24
What else can I do to make it work? I really want to use Ruckus, but not with this issues....
Photo of Sorimis

Sorimis

  • 3 Posts
  • 0 Reply Likes

Posted 1 year ago

  • 1
Photo of Monnat Systems

Monnat Systems, AlphaDog

  • 763 Posts
  • 163 Reply Likes
are these two AP configured on static IP of 192.168.64.X ??
Photo of Sorimis

Sorimis

  • 3 Posts
  • 0 Reply Likes
yes, there is no dhcp configured for this subnet
Photo of Monnat Systems

Monnat Systems, AlphaDog

  • 763 Posts
  • 163 Reply Likes
ok. please make sure both AP's are on same firmware version. check network configuration, reconfigure if needed. post configuration connect them wired to the network.

if it still fails, do you what is the LED status on disconnected AP? Is it pingable from AP GUI and network? are you able to access the GUI of disconnected AP?
Photo of Sorimis

Sorimis

  • 3 Posts
  • 0 Reply Likes
Thank you for the help, it was the firmware. For some reason I found only the .55 yesterday and not the .62. Now both APs have the newest firmware and its finally working