Friends,
We are working with SCG200, and have set up a new Datapla. I would like to know how do I block DP-0 traffic, forcing the new Data plane (DP-1) to take over?
I've tried ACL without success.
I have already tried via the command line, both in the AP, and in the CLI of the SCG, also to no avail.
CLI-AP:
set tunnelmgr : set tunnelmgr {options}
-> disable/enable
-> tunnel <enable|disable>
-> type <rksgre|softgre> [mode comcast]
-> auth <enable|disable>
-> port <dest(SCG-D) port #>
ü rkscli: set tunnelmgr SCG-D Sorry, no match to set tunnelmgr SCG-D found
ü rkscli: set tunnelmgr SCG-D Sorry, no match to set tunnelmgr SCG-D found
ü rkscli: set tunnelmgr SCG-D 1Sorry, no match to set tunnelmgr SCG-D 1 found
------------------------------------------------------------------------------------
ARC-RJ-WLC-R08# remote ap-cli D4:68:4D:10:11:00 "set tunnelmgr port SCG-D0 disable"
Error: parameter error -- Agrument must be digits
ARC-RJ-WLC-R08# remote ap-cli D4:68:4D:10:11:00 "set tunnelmgr SCG-D0 disable"
Error: parameter error -- Agrument must be digits
ARC-RJ-WLC-R08# remote ap-cli D4:68:4D:10:11:00 "set tunnelmgr port SCG-D0 port disable"
Error: parameter error -- Agrument must be digits
ARC-RJ-WLC-R08# remote ap-cli D4:68:4D:10:11:00 "set tunnelmgr SCG-D0 disable"
ARC-RJ-WLC-R08# remote ap-cli D4:68:4D:10:11:00
"set tunnelmgr SCG-D0 disable"
Any tips?
"get tunnelmgr"
------ TUNNELMGR Information ------
tunnelmgr Service: Enabled
Tunnel Establishment: Enabled
Tunnel Authentication: Enabled
Tunnel Cipher: Disabled
PMTU Discovery: Enabled
Node Affinity: Disabled
Force Fragmentation: Disabled
Tunnel Type: Ruckus-GRE
SCG-D IP List: [email protected][x.x.x.x]:23233,[y.y.y.y]:23233
Internal Subnet: 10.x.0.0
GRE over UDP: AP/SCG-D UDP port # 23233/23233
Keep Alive Interval/Retry-limit: 10/6
Keep Alive Interval2: N/A
Jardel Almeida
Thanks for the quick response.
I saw it, I searched it here in support Ruckus, but this feature is only working on vSZ.
http://docs.ruckuswireless.com/smartzone/3.6.1/sz100-vsze-administrator-guide/GUID-508F58A7-0642-4F2...
Thanks!