Ruckus 2942 WLAN bridge

  • 1
  • Question
  • Updated 3 years ago
hey guys,

i want to use the Ruckus AP 2942 as an WLAN Bridge.
Can i configure the AP for bridging from the wireless LAN to the wired network??

ty
chris
Photo of Christoph Palata

Christoph Palata

  • 1 Post
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of yy

yy

  • 6 Posts
  • 0 Reply Likes
Hi Chris,

I believe this is possible if you have ZD with a spare licenses to enable mesh.
Photo of Michael Brado

Michael Brado, Official Rep

  • 2114 Posts
  • 297 Reply Likes
A ZoneDirector is necessary to Mesh two APs, and the second Eth port on the Mesh AP can be directly connected to a wired Printer like shown in the diagram.