Ruckus 12v input polarity and range

  • 1
  • Question
  • Updated 4 weeks ago
  • (Edited)
What's the 12v input polarity and voltage range?

I have a bunch of old 7962s that we're selling off to staff for home standalone use after upgrading.

I can see they take a 12v 1.5A power supply, but what's the polarity?

Also since they work with solar, can I assume all Ruckus ZoneFlex APs will work from 9v-15v DC?
Photo of Ben Reuter

Ben Reuter

  • 1 Post
  • 0 Reply Likes

Posted 4 weeks ago

  • 1
Photo of Alex Shalima

Alex Shalima

  • 39 Posts
  • 11 Reply Likes
Hi Ben,

As with all DC Power supplies, Ground(-) is on the outside, Power(+) is on the inside of the plug.

The best way to use these WAPs is with Ruckus Power supply, that is usually around $10 give or take. 12V 1A should do the job. A PoE Injector will also work.

Do NOT use these with anything other than 12V PS. You can float the Amperage up to 1.5-2A, but do not change the voltage. You are risking to damage the device.


Cheers,
Alex
(Edited)