Remote Management/Dynamic DNS Unleashed

  • 1
  • Question
  • Updated 1 year ago
  • Answered
Is there a place somewhere on the Ruckus Unleashed virtual controller to enable Dynamic DNS? If not, how would one manage their WLAN remotely? If I put a static IP as the IP of the master AP, that will allow me to do that right? I have not tried that yet.. 

Thank you.

Eli
Photo of Elijah Duncan

Elijah Duncan

  • 6 Posts
  • 1 Reply Like

Posted 2 years ago

  • 1
Photo of Abhi Maras

Abhi Maras

  • 10 Posts
  • 3 Reply Likes
Hi Eli,
Yes a static IP on the master will allow you to manage the Unleashed cluster. Any AP's IP will redirect to the Master interface. 

Hope that helps.

--
Regards
Abhi
Photo of Grant Chen

Grant Chen

  • 2 Posts
  • 0 Reply Likes
Hi Abhi,

Whrere is the "unleashed.ruckuswireless.com" record ?

Should I add a  "unleashed.ruckuswireless.com" A record in our DNS server?

How  "unleashed.ruckuswireless.com" map to another IP when Master down and a new Master UP ?

Regards,
Grant Chen
Photo of Abhi Maras

Abhi Maras

  • 10 Posts
  • 3 Reply Likes
Grant,
No entry is needed on the DNS server, As long as you are connected to any said broadcasted by the Unleashed AP, you will be redirected to the Master console when you go to the URL. It will also point to whichever AP is the Master at that time. 
Photo of Grant Chen

Grant Chen

  • 2 Posts
  • 0 Reply Likes
Hi Abhi,

Thanks~

But how Unleashed AP can tell me the IP of "unleashed.ruckuswireless.com" if I don't add an A record in our DNS server?

Regards,
Grant Chen
Photo of Abhi Maras

Abhi Maras

  • 10 Posts
  • 3 Reply Likes
DNS snooping is done on the unleashed AP for "unleashed.ruckuswireless.com" and uses the master ip to resolve the address. 
Photo of Ryan Sligar

Ryan Sligar

  • 2 Posts
  • 0 Reply Likes
If we are trying to access the management dashboard remotely and have setup port forwarding through our router to the master AP, what happens if the master is offline and the secondary AP becomes master.   Is there a virtual IP address that we can always connect to no matter which AP becomes master?

We would not be connecting to the SSID as we're connecting remotely for management so I don't think we can use the unleashed.ruckuswireless.com option as it's only for local access.

Thank you,

Ryan
Photo of Ryan Sligar

Ryan Sligar

  • 2 Posts
  • 0 Reply Likes
Thanks Dan!  It would be nice if they incorporate some type of virtual IP on the LAN side.
Photo of Dan Marrero

Dan Marrero

  • 13 Posts
  • 3 Reply Likes
Ryan, glad to hear the information helped. Also, as Ahbi mentioned, if you type any IP for any Access Point it will automatically direct you to the master AP and show the login screen.
Photo of Brant Nelson

Brant Nelson

  • 6 Posts
  • 0 Reply Likes
I cannot even connect to the master's IP from my wired network.  How can I configure from wired system?
Photo of Michael Brado

Michael Brado, Official Rep

  • 2074 Posts
  • 289 Reply Likes
Hi Brant, I replied on your other thread.  Wired clients *should* be able to reach your Unleashed AP IPs. 
And like Dan/Abhi mentioned, any of the IP address browser sessions, should take you to the current Master AP.
Using the 'unleashed.ruckuswireless.com' URL works when you're connected locally on wireless.
(Edited)
Photo of Brant Nelson

Brant Nelson

  • 6 Posts
  • 0 Reply Likes
Interesting - I could connect when I changed to static IP, but not when trying to connect to the dynamically assigned IP.  Thanks for your comments!