HO Network Remote Network
IP Schema 10.10.0.0/21 192.168.63.0/24 Router IP192.168.63.21 ( DHCP running in the router)
WLAN VLAN 104 controller IP 10.10.104.1 NO VLAN; default VLAN 1
Management VLAN 104
The AP is able to get the IP address under 192.168.63.0/24 subnet, the controller in the HO detects the Access point and pushes the configuration and it ends with a log ap reset due to country code change,, and there after the AP stops fetching the DHCP from the remote router.
Can someone throw light in this kind of scenario.
Be the first to post a reply!