R720 powering

  • 1
  • Question
  • Updated 3 months ago

I have R720 powered from PoE+ switch, switch logs:


Gi1/0/10 New LLDP TLV Request but with Invalid request 41300 max allowed power 30000

But in documentation i can read that:

"An 802.3at-compliant Power over Ethernet (PoE) switch or PoE injector.

• --OR--
An 802.3af-compliant Power over Ethernet (PoE) switch or PoE injector .

Note: If powered by 802.3af PoE, note that the feature set is reduced, as follows: - 1 x 4 radio chain operation mode - Second Ethernet port disabled - USB port disabled"

AP doesn't work ...


Photo of Agora

Agora

  • 10 Posts
  • 0 Reply Likes

Posted 11 months ago

  • 1
Photo of Stephen Hall

Stephen Hall

  • 26 Posts
  • 1 Reply Like
this might be related to LLDP support or issues on your switch (but it should still work / power on the AP).   You can try SSH into the ap and run:  

set power-mode af      
(or "at"  if you sw supports).

(then see if it powers up via your poe switch when its locked to AF  ,  i also think you can force AF via the web interface on standalone ruk APs)

get power-mode    shows the current setting (prob auto)