R700 Ceiling Mounting on Slotted Tbar

  • 1
  • Question
  • Updated 4 years ago
We've got a silly problem but one folks have probably overcome easily.  We want to ceiling mount a couple of R700 APs on a drop ceiling but the Tbars aren't the typical flat tbars that the standard clips will work with.  The bars are skinny with a slot down the middle of them.  They seem to be called slotted t bars but who knows.  Has any one got a quick solution they can recommend versus just leaving the APs above the ceiling tiles facing down?
Photo of Bobby Wittenberg

Bobby Wittenberg

  • 11 Posts
  • 0 Reply Likes

Posted 5 years ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 3298 Posts
  • 523 Reply Likes
Please don't anyone suggest Duct Tape!  =:^O
Photo of John D

John D, AlphaDog

  • 586 Posts
  • 180 Reply Likes
Cmon, everyone knows you use 3M Command Strips instead! :)
Photo of Scott S

Scott S

  • 3 Posts
  • 0 Reply Likes
Did you ever find a solution to this?  We have 2 R600's that we need to mount to the same type of ceiling.

I found that Juniper has a bracket specifically for this, but wondering if there is a universal or Ruckus version: