r610 unleashed performance

  • 1
  • Question
  • Updated 2 months ago
  • Acknowledged
What is the recommended software for r610 unleashed performance? we are getting 3-400 meg of a 1 G connection. Hardwired devices can get ~850 meg
Photo of Kevin Karch

Kevin Karch

  • 3 Posts
  • 0 Reply Likes

Posted 2 months ago

  • 1
Photo of Tyler Riddle

Tyler Riddle

  • 3 Posts
  • 4 Reply Likes
Performance is based on your setup/device support and interference.  I always say basically cut theoretical spec in half to get your real-world speeds.
1. Ruckus needs to be on maximum channelization (80 or 160 mhz as I'm not sure what shows up)
2. Device needs to support that Channelization with 3x3 antennas.

I would say that you will never see those speeds with most equipment and that's ok. Unless you are doing some serious file transferring, what need would you have for it at this point in time?
Photo of hayk

hayk

  • 282 Posts
  • 39 Reply Likes
Kevin,

         What are you downloads when near a r610? Uploads?  What device?  What unleashed firmware are you on?
Photo of Kevin Karch

Kevin Karch

  • 3 Posts
  • 0 Reply Likes
200.7.10.102.64 we are set to 80 mhz on 5 G. we do see better performance with R610s on our hosted SZ controller same location w 80 and ofcourse 160 mhz channels 
Photo of hayk

hayk

  • 282 Posts
  • 39 Reply Likes
Right now there seems to be a bug in unleashed firmware 200.7.10.x

Firmware 200.6.10.x seems to help

please follow this discussion.

 https://forums.ruckuswireless.com/ruckuswireless/topics/slow-download-speeds-r710-unleashed

Photo of Michael Brado

Michael Brado, Official Rep

  • 3122 Posts
  • 457 Reply Likes
The other thread about R710 Unleashed issue is not necessarily affecting other models.

Has anyone tested maintenance release 200.7.10.202.92 that was recently posted?

https://support.ruckuswireless.com/software/2251-ruckus-unleashed-ap-200-7-10-202-92-ga-refresh1-sof...
Photo of Andrew Giancola

Andrew Giancola

  • 143 Posts
  • 47 Reply Likes
Yes, I'm on it. things seem fine to me, R610 Running Unleashed.
Photo of hayk

hayk

  • 282 Posts
  • 39 Reply Likes
I know this also impacts the R610, I know under certain conditions it impacts the R610 too..  Doesn't happen to all R510, R610, R710 users.. but does impact all 3 APs and more... I have tested all 3 APs personally... and have deployed R510, R610...
(Edited)