R600 connected to VSZ - Radios showing off.

  • 1
  • Question
  • Updated 5 months ago
  • (Edited)
I have setup everything in the VSZ Domain --> Zone --> AP Group and WLAN Group etc.  So all is setup and AP is registered and provisioned.  However both radios are showing off.  So when I go and look under Access Points I noticed that under WLAN Group default is showing up.  If I select "over ride zone  config" and choose the group it is supposed to be in radios come online.

Now I did move it to a specific AP Group and that Group does show the WLG this AP is supposed to be under but for some reason unless I force it by overriding it, it won't work.

Update: So I figured it out that I had to configure the AP and check the box "Enable WLAN Service".  However now my issue is what if I have 100 AP's I will have to do it on 100 AP's one by one?
Photo of Ali

Ali

  • 15 Posts
  • 0 Reply Likes
  • annoyed

Posted 5 months ago

  • 1

Be the first to post a reply!