R510 Standalone, Dhcp reservation

  • 1
  • Question
  • Updated 3 months ago

Hello, I have an R510 with Standalone firmware R510_106.1.0.0.469
I have set the dhcp server for the LAN local network, but I can't find how to enter the reservations.
For example the client with a given mac gets a determined ip address, etc.
Photo of Fabio Ugolini

Fabio Ugolini

  • 2 Posts
  • 0 Reply Likes

Posted 3 months ago

  • 1
Photo of David Black

David Black

  • 66 Posts
  • 37 Reply Likes
Maybe I don’t understand your question, but the AP in autonomous mode has nothing to do with dhcp or reservations. Reservations are made on the dhcp server provided that the dhcp service supports it.
Photo of Fabio Ugolini

Fabio Ugolini

  • 2 Posts
  • 0 Reply Likes
Photo of David Black

David Black

  • 66 Posts
  • 37 Reply Likes
I'm probably not the best to answer this because we never use APs in standalone mode. DHCP and NAT appear to be supported but I don''t see any ability to do reservations.  Ruckus controller and AP functionality is very good and better than most competitors, but dhcp functionality has always been mediocre at best.

(Edited)
Photo of Ankush

Ankush, Employee

  • 72 Posts
  • 40 Reply Likes
Hi Faboi,

We have this option on our Unleash Platform. All you have to do is download the latest 200.7 image from our support site and upgrade your AP to unleash.

https://support.ruckuswireless.com/software/2043-ruckus-unleashed-ap-200-7-10-102-64-ga-refresh1-sof...




Regards,
-Ankush