Can I get the antenna pattern for the R500 access point? AirMagnet does not have this model included and I am trying to create my own based off a radiation chart. I can't seem to find an antenna pattern anywhere online for this model. Thankss
- 5 Posts
- 0 Reply Likes
Posted 4 years ago
- 48 Posts
- 12 Reply Likes
Unless I'm misunderstanding the question, there is no "pattern" for a Ruckus AP. Most Ruckus APs are omni antenna arrays, capable of generating multiple different patterns on a per-packet basis. The low end R500 can do 64 unique patterns, I believe. Higher end units can do 3000-4000 patterns.
Michael Brado, Official Rep
- 3069 Posts
- 442 Reply Likes
These can be found in KBA-4352: ZonePlanner antenna patterns for T300 and H500 model APs,
which will be visible shortly (next server update period). https://support.ruckuswireless.com/answers/000004352
which will be visible shortly (next server update period). https://support.ruckuswireless.com/answers/000004352
- 5 Posts
- 0 Reply Likes
And the R500? Currently I have access to T300 and H500 patterns in AirMagnet, R500 is the last one I need. Is the H500, R300, or R700 pattern comparable enough to the R500 pattern to use one of those as a substitute? Thanks!
Michael Brado, Official Rep
- 3069 Posts
- 442 Reply Likes
Yes, check for this article too, KBA-3863: ZonePlanner antenna patterns for new APs (R500, R600, T300 and T301).
https://support.ruckuswireless.com/answers/000003863
If not visible right away, it will be shortly (w/in 6 hr server update period), as I made some minor updates.
https://support.ruckuswireless.com/answers/000003863
If not visible right away, it will be shortly (w/in 6 hr server update period), as I made some minor updates.
- 349 Posts
- 94 Reply Likes
Related Categories
-
Ruckus Indoor APs
- 1832 Conversations
- 753 Followers
Dylan Kinney