Quick Setup Guide (SZ100) vs Getting Started Guide (SZ100)

  • 1
  • Idea
  • Updated 2 months ago
  • Planned
Photo of Gareth Hay

Gareth Hay

  • 8 Posts
  • 2 Reply Likes

Posted 2 months ago

  • 1
Photo of James M

James M, Employee

  • 5 Posts
  • 3 Reply Likes
Thanks Gareth, I'll get this checked and refer it to our documentation team. I appreciate you taking the time to report this.

FYI (as an aside) in 5.1 onwards HTTP access has been removed from the Setup Wizard, leaving only HTTPS://.

All the best,

James
Photo of Gareth Hay

Gareth Hay

  • 8 Posts
  • 2 Reply Likes
Not according to the doc's above.
(Edited)
Photo of James M

James M, Employee

  • 5 Posts
  • 3 Reply Likes
Thats right; another documentation issue that will be addressed!
Photo of Gareth Hay

Gareth Hay

  • 8 Posts
  • 2 Reply Likes
Thanks. Lost an hour of remote hands time as he could ping the unit but not get into the GUI as he was following the wrong guide. Admittedly he should have raised/hunt around the support site.
(Edited)
Photo of EightOhTwoEleven

EightOhTwoEleven

  • 75 Posts
  • 20 Reply Likes
But you shouldn't have to go hunting, the guide should be the guide - and it should be correct. I don't know who heads up the documentation team, but they seriously need to get a good kick in the butt.