Product Change Notice - ZoneFlex AP and Standalone Mode Operation

  • 1
  • Announcement
  • Updated 3 years ago
Starting January 1, 2015 the default image that ships from the factory on Ruckus access points (APs) will change from ZoneFlex Release 9.8.x to ZoneFlex Base Image Release 100.0.x. Most customers will not notice any difference in AP operation. The APs will continue to support standalone mode and FlexMaster managed mode operations and will automatically discover and connect to ZoneDirector or RuckOS controllers.

All APs shipping with Base Image Release 100.0.x and higher now support auto-discovery of all RuckOS controllers in addition to ZoneDirector controllers. It is no longer necessary to order SCG-APs with SKU prefix 9S1-abcd-xxyy for SCG-200 controller deployments.

Ruckus recommends ordering APs using the standard SKU prefix 901-abcd-xxyy for all network deployments regardless of controller type being ZoneDirector or RuckOS.
Photo of Michael Brado

Michael Brado, Official Rep

  • 1994 Posts
  • 280 Reply Likes

Posted 3 years ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 1994 Posts
  • 280 Reply Likes
To followers of topics related to standalone ZoneFlex AP features, the new 100.0.x
AP image is based on and has fixes that would have gone into a ZoneFlex 9.9.

With this announcement, please find that the 100.0.0.0.127 base image firmware for
standalone APs has now been posted under the Support Portal Downloads page.

https://support.ruckuswireless.com/so...
Photo of Bram Ueffing

Bram Ueffing

  • 7 Posts
  • 0 Reply Likes
That's fantastic. Thanks for listening!
Photo of Max O'Driscoll

Max O'Driscoll, AlphaDog

  • 322 Posts
  • 77 Reply Likes
Any particular reason for making it 100 and not 10?

Did you feel a win8 skip9 win10 moment coming on suddenly?