POE Injector with 7731 not powering the device

  • 1
  • Question
  • Updated 3 years ago
I am installing a 7731, when I connect the 7731 device to the AP/BRIDGE port of the included POE injector, the red light on the POE injector turns off, and the 7731 does not get power. Any ideas?
Photo of Lex

Lex

  • 12 Posts
  • 4 Reply Likes

Posted 4 years ago

  • 1
Photo of Matt

Matt

  • 25 Posts
  • 7 Reply Likes
Have you tried the PoE that comes with the other 7731?
Photo of Todd

Todd

  • 50 Posts
  • 6 Reply Likes
I had similar issues. I ended up resolving my issue using PowerDsine 3501G midspans.

Now since I'm in Minnesota, I bought the PowerDsine 9000 series midspan so as to provide 802.3at power to enable the internal heaters if needed during the winter months.