Overlapped Subnet IP range

  • 2
  • Question
  • Updated 7 months ago
  • Answered
I am having problem with Ruckus R710 Subnet configuration:

I have configured Local Subnet 1 with following:

Enabled
Local IP: 192.168.40.1
Mask: 255.255.255.0
DHCP: Enabled
Starting Address: 192.168.40.10
Maximum DHCP Users: 240
Access VLAN: 40


When I try to configure Local Subnet 2 with following:

Enabled
Local IP: 192.168.50.1
Mask: 255.255.255.0
DHCP: Enabled
Starting Address: 192.168.50.10
Maximum DHCP Users: 240
Access VLAN: 50

I get message: 
Overlapped Subnet IP range

But I cannot understand why would it be? I have even tried further spread subnets like: 192.169.50.1 or something else, but still get same message...
Photo of Petar Pisnjak

Petar Pisnjak

  • 3 Posts
  • 2 Reply Likes
  • confused

Posted 1 year ago

  • 2
Photo of Martin

Martin, Official Rep

  • 199 Posts
  • 44 Reply Likes
Hi Petar,

Which software are you running on the R710 ?

Kind regards
Martin
Photo of Petar Pisnjak

Petar Pisnjak

  • 3 Posts
  • 2 Reply Likes
Software Version: 100.2.0.0.336
Photo of Hussam Abuqamar

Hussam Abuqamar

  • 2 Posts
  • 1 Reply Like
I am having same issue; On contrary R700 is stable and allow me to do this.
I think this is a bug that has been for a while in R710 and not taken care of.
(Edited)
Photo of Antonio S

Antonio S

  • 2 Posts
  • 1 Reply Like
do you solved this problem ?
Photo of Hussam Abuqamar

Hussam Abuqamar

  • 2 Posts
  • 1 Reply Like
Just updated the firmware and worked fine since then
Photo of Antonio S

Antonio S

  • 2 Posts
  • 1 Reply Like
Thankyou, I upgrade to version 104.0.0.0.1347 and works excelent !
Photo of Petar Pisnjak

Petar Pisnjak

  • 3 Posts
  • 2 Reply Likes
No, changed to bridge mode so dont need it anymore