one AP with 3 SSID and 3 subnet

  • 1
  • Question
  • Updated 4 weeks ago

hello,

is it possible to do this ?

I want with one AP (r300) and ZD  1200, have 3 SSID and 1 difféerent subnet.

example:

SSID 1 with  subnet 1

SSID 2 with subnet 2

SSID 3 with subnet 3


and these 3 SSID get ip by the same DHCP server.

between AP and Dhcp server, there is one routeur configure on relay DHCP.


thank's for your help

 

Photo of cedric bantignie

cedric bantignie

  • 3 Posts
  • 0 Reply Likes

Posted 4 weeks ago

  • 1
Photo of chbane mohamed

chbane mohamed

  • 22 Posts
  • 1 Reply Like
Yes it's possible, just the port of the access point should be trunk
Photo of cedric bantignie

cedric bantignie

  • 3 Posts
  • 0 Reply Likes
thank's but the R300 has one port. there is a another parameter for more port ?
Photo of chbane mohamed

chbane mohamed

  • 22 Posts
  • 1 Reply Like
This one port should be trunk
Photo of Shane Ferguson

Shane Ferguson

  • 10 Posts
  • 2 Reply Likes
In addition to Chbane's comment you will need to assign the VLAN for each SSID by setting it in the Advance Section of  each WLAN.
Photo of cedric bantignie

cedric bantignie

  • 3 Posts
  • 0 Reply Likes
i assigned the vlan for each SSID but yhe routeur don't receive the query for relay DHCP for the vlan.
thank's for you help
can you say if I forgot one thing
Photo of Shane Ferguson

Shane Ferguson

  • 10 Posts
  • 2 Reply Likes
The AP's port is configured as a trunk port, As I mentioned before the VLAN is specified with in advanced settings on each WLAN. Ensure that the port on the router or switch the AP is connected to is configured as a trunk port also (has tagged VLANS applied to it).

Also ensure that DHCP helper is setup correctly on each VLAN.
(Edited)