New R710 deployment problems with HP Switches entering POE+ 802.3at mode

  • 1
  • Question
  • Updated 2 years ago
  • (Edited)
All of our ruckus APs (R710s) are in 802.3af mode.  Every AP is connected to a POE+ port on our 5412zl switches (Capable of 37 watts per port).  In CLI on our ZD3000 we have set the lldp enable in the System Default group.  Anyone else seeing this issue?  Thank you!
Photo of Josh Hymer

Josh Hymer

  • 24 Posts
  • 2 Reply Likes
  • Frusterated

Posted 2 years ago

  • 1
Photo of Sergiy Oliynyk

Sergiy Oliynyk

  • 3 Posts
  • 1 Reply Like
Check POE limits on HP, worked for my R710's:
Photo of Michael Brado

Michael Brado, Official Rep

  • 2183 Posts
  • 301 Reply Likes
Is LLDP also configured on the switch ports?

https://support.ruckuswireless.com/answers/000005005
Photo of Sean

Sean

  • 346 Posts
  • 88 Reply Likes
Why cant knowledge articles make it in to the manuals :)
Photo of Michael Harris

Michael Harris

  • 2 Posts
  • 0 Reply Likes

Does not work with Cisco SG300 switches. I heard today that there is an AP Command to force 802.3at request from AP.

Stay tuned

Photo of Sergiy Oliynyk

Sergiy Oliynyk

  • 3 Posts
  • 1 Reply Like
On HP-2920 LLDP is enabled by default... For the rest on config i used this KB:
https://www.juniper.net/techpubs/en_US/release-independent/nce/information-products/pathway-pages/nc...