Multiple SSID in Ruckus ZF7372

  • 2
  • Question
  • Updated 3 years ago
Hi All,

can i configure multiple SSID with different VLAN in Ruckus Zoneflex7372 without ZoneDirector?
Photo of Ibnu Hamzah

Ibnu Hamzah

  • 5 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 2
Photo of Monnat Systems

Monnat Systems, AlphaDog

  • 714 Posts
  • 151 Reply Likes
Hello Ibnu Hamzah,

Yes, you can configure multiple SSID with different VLAN in Ruckus Zoneflex7372 without ZoneDirector.

Actually this is applicable to all Ruckus Devices both indoor and outdoor.
Photo of Ibnu Hamzah

Ibnu Hamzah

  • 5 Posts
  • 0 Reply Likes
u can see my configuration..

internet configuration :



this is ethernet configuration :


this is local subnet 1 :



this is local subnet 2 :



this is SSID 1 n SSID 2 :





and know with this configuration, SSID 1 is success but not SSID 2. You know what wrong?
Photo of Monnat Systems

Monnat Systems, AlphaDog

  • 714 Posts
  • 151 Reply Likes
Configuration looks right to me and cannot test at this point of time as i am at a site visit.

could you please temme just to be sure what is working and what is NOT?
Also did you try swapping the VLAN info from working to not working SSID to see if that starts to work? this is just to confirm that configuration on AP is ok and NOT some switch VLAN config issue?
Photo of Ibnu Hamzah

Ibnu Hamzah

  • 5 Posts
  • 0 Reply Likes
the isssue is if i connect use SSID 2 gateway not ip address VLAN 30 (10.10.0.45), ip default gateway is local ip address from local subnet 2.



this is configuration in my extreme switch :
port 7 is port 1 in Ruckus with Vlan 80



port 5 is port 2 in Ruckus with Vlan30



this is VLAN Table

Photo of Ibnu Hamzah

Ibnu Hamzah

  • 5 Posts
  • 0 Reply Likes
SSID 1 is working..

this is information IP address use SSID 1



Default gateway is IP Adress VLAN 80.