multiple R310 APs for 1 network

  • 1
  • Question
  • Updated 7 months ago
  • Answered
Hi, I would like to know if it is possible to use 4 R310 APs (in different rooms) to create 1 SSID for office employees to access the entire network and 1 SSID for guests for Internet access only. Do I need an additional ZoneDirector for this? Where can I find installation manuals for the R310? Thanks! Frank
Photo of Frank Mulder

Frank Mulder

  • 3 Posts
  • 0 Reply Likes

Posted 8 months ago

  • 1
Photo of Beat Schilliger

Beat Schilliger

  • 10 Posts
  • 3 Reply Likes
Hi Frank, I operate two R310 in an unleashed network at home. I've got two SSIDs: One in the intranet, one in the DMZ with one-time-passwords (valid for one day) for guests or/and unsafe devices (Smart-TV, Smartmeters etc.). It works as describe - no problems!
https://www.ruckuswireless.com/products/system-management-control/unleashed
Photo of Frank Mulder

Frank Mulder

  • 3 Posts
  • 0 Reply Likes
Thanks! Sounds like this should work. You also have 1 SSD for your intranet?  Should you install the first AP as master and the others as backup?
Photo of Beat Schilliger

Beat Schilliger

  • 10 Posts
  • 3 Reply Likes
SSID 1: Intranet in VLAN x
SSID 2: DMZ in VLAN y

AP 1: Master
AP 2: no special configuration

Photo of tjeee tje

tjeee tje

  • 5 Posts
  • 0 Reply Likes
How do you configurate the VLan
Photo of Beat Schilliger

Beat Schilliger

  • 10 Posts
  • 3 Reply Likes
You can do this by editing the WiFi network in the Unleashed Dashboard:
Photo of tjeee tje

tjeee tje

  • 5 Posts
  • 0 Reply Likes
Thanks, i did that, but the client does not connect.
Photo of Frank Mulder

Frank Mulder

  • 3 Posts
  • 0 Reply Likes
Thanks a lot. Sounds like this is possible without problems.
Photo of Beat Schilliger

Beat Schilliger

  • 10 Posts
  • 3 Reply Likes
Yes, I think so. I'm very satisfied with this solution.
Photo of Michael Brado

Michael Brado, Official Rep

  • 2049 Posts
  • 286 Reply Likes
Thanks Community!
Here's the Release Notes and Firmware links for R310 Frank,
if you need to change the code they're running now.
https://support.ruckuswireless.com/documents/1295-ruckus-unleashed-200-3-ga-release-notes
https://support.ruckuswireless.com/software/1136-ruckus-unleashed-ap-200-3-9-13-228-ga-software-for-... 

Admin Guide for Unleashed 200.3 is Online: 
http://docs.ruckuswireless.com/unleashed/200.3/index.html
(Edited)