multiple management interfaces on the SZ100

  • 1
  • Question
  • Updated 4 years ago
  • Answered
I have an SP customer who wants to provide a managed service to their customers using the SZ100 platform.
They require a separate management address for their own use to manage the SZ100 remotely.
Scenario: network for AP control and management using their clients' internal network network for access from outside the clients network for remote management

I tried configuring a user defined interface on, but it does not work. The user defined interfaces do not accept gateway addresses. Is there a solution for this?
Photo of Julian Daniels

Julian Daniels, Employee

  • 9 Posts
  • 0 Reply Likes

Posted 4 years ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 3298 Posts
  • 523 Reply Likes
I think you need to configure the site FW to port forward the desired external IP to the SZ100's 10.1.1.x IP address.
Note, their 172.16.x.x is RFC-1918 non-routable so it must traverse the SP backbone.
Photo of Jeronimo


  • 394 Posts
  • 49 Reply Likes
No. it's impossible.

I tried that you need, but user defined interface does not support to management interface.