Monitoring SNMP traps on Virtual SmartZone

  • 1
  • Question
  • Updated 3 months ago
  • Answered
There's a couple SNMP traps we want to monitor, but these MiB's are not included in the MiB's download from the Support page. Does anyone have a way to monitor these event traps on the Virtual SmartZone 5.1?

ruckusSZAPDisconnectedTrap
ruckusSZCriticalAPDisconnectedTrap
ruckusSZAPFirmwareUpdateFailedTrap
ruckusSZAPFactoryResetTrap
ruckusSZCMResetFactoryByUserTrap


Photo of Helpdesk Talpa Media

Helpdesk Talpa Media

  • 2 Posts
  • 0 Reply Likes

Posted 3 months ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 3001 Posts
  • 423 Reply Likes
Hello,

     Are you looking at vSZ-H (High Scale), or vSZ-E (Enterprise) latest 5.1.1 MIBs? 

https://support.ruckuswireless.com/software/2072-smartzone-5-1-1-0-589-mr1-snmp-mibs-for-sz300-and-v...

https://support.ruckuswireless.com/software/2073-smartzone-5-1-1-0-589-mr1-snmp-mibs-for-sz-100-and-...

     Do you see those OIDs in other/previous vSZ or SZ or SCG release MIBs?
Photo of EightOhTwoEleven

EightOhTwoEleven

  • 101 Posts
  • 26 Reply Likes
Just do a web search for the trap name, grab the OID and off you go. 
Photo of Helpdesk Talpa Media

Helpdesk Talpa Media

  • 2 Posts
  • 0 Reply Likes
Thanks guys, I'll figure it out!