MM2211 and Bonjour on Mac

  • 1
  • Question
  • Updated 7 years ago
I have noticed that when I use the 2211 as a repeater in my network, I get problems with devices using Bonjour to communicate. As an example HP printers in the network can no longer be found. As soon as I power down the 2211 everything works as normal.
It therefore seems that the 2211 will not transfer Bonjour packets. Is there a way to activate this in the 2211 or does anyone know a workaround?
Photo of André Evers

André Evers

  • 1 Post
  • 0 Reply Likes

Posted 7 years ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 3298 Posts
  • 523 Reply Likes
Bonjour is a LAN based service advertisement protocol, so try Bridging, not Routing w/NAT and you may have more success.
Photo of Alf Watt

Alf Watt

  • 11 Posts
  • 2 Reply Likes
What version of the AP Firmware are you running on that 2211?