Migration of AP's from vsz 5.1.1 to 3.5.1 issues

  • 1
  • Question
  • Updated 6 days ago
  • Acknowledged
Hi All..... I was trying to migrate AP's from vsz 5.1.1 to 3.5.1. it did not work of which i had to login to cli and set factory then set scg ip from default login super
Photo of Hilton Jonkers

Hilton Jonkers

  • 1 Post
  • 0 Reply Likes

Posted 6 days ago

  • 1
Photo of Abilash PR

Abilash PR

  • 6 Posts
  • 4 Reply Likes
Hi Hilton, 

This is tricky and challenging using command "set scg ip <3.5.1 controller ip>" on the AP and deleting the APs from old controllers would work, if the AP numbers are more I would have those APs moved in one Zone and would run a AP-Cli script to do this, once the AP establishes connection to which ever controller it would try to upgrade the firmware that is available on the Zone.

I understand the method that you tried is harder.

Regards,
Abilash PR.