Migration from ZD1200 to Cluster SZ100 x 2

  • 1
  • Question
  • Updated 1 month ago
  • Acknowledged
how to migrate ZD full configuration of WLAN,ZONE, MAC Address Filtering into SmartZone,
Referring into this KB mention only AP can be migrate not all configuration from ZD.

https://support.ruckuswireless.com/articles/000006305.

Need advice on this thing. If cannot it is need to configure manually into Smart.

My plan as per below, please comment if i missing something.

1. UP 1 box of SZ100-1 and setting cluster.
2. Import all AP from ZD using migration toll
3. Manually config for zone, WLAN, client filtering, guest ssid, etc.
4. New SZ100-2 joined cluster and synd with primary.
5. As all AP and controller in same subnet, both new SZ100 with connected to the switch using 1 eth port. 
6. no need to connect point to point between SZ100

Please advise.

thanks 

Photo of Mohd Noor Hafiez Mohd Fakarudin

Mohd Noor Hafiez Mohd Fakarudin

  • 1 Post
  • 0 Reply Likes

Posted 1 month ago

  • 1
Photo of Sanjay Kumar

Sanjay Kumar, Employee

  • 133 Posts
  • 52 Reply Likes
Hi Mohd,

Yes, you can only migrate the AP but not the config from the ZD.
This migration toolset is focused on migrating the APs and preserving operational configurations necessary to maintain AP connectivity, such as IP settings, mesh configuration, management VLAN, and more. It does not provide full migration of ZD configuration into SZ.

Your plan of action seems to be fine. Add the below points on the list as well.

1. SZ has enough AP licenses to manage.
2. Below ports between the ZD-SZ is opened for the migration to be successfully.
TCP 21, 22, 443, 11443, 91, 69, 80, 8443
UDP 69