Mesh AP wired client isolation

  • 1
  • Question
  • Updated 10 months ago
I have ZD controlled AP models 7962 and 7055 where the 7962 are root APs and 7055 are mesh APs with wired ports for client in room use. I have checked both boxes for client isolation in the WLAN settings and have a whitelist for the guest gateway on the network. It does not appear that client isolation is working as the wired client on MeshAP01 is able to ping another wired client on Mesh AP02. Is it possible to isolate these wired clients?
Photo of Richard Little

Richard Little

  • 2 Posts
  • 0 Reply Likes

Posted 10 months ago

  • 1
Photo of Gupta Bobby

Gupta Bobby

  • 18 Posts
  • 2 Reply Likes
Wired clients cannot be isolated as per my knowledge.
Photo of Richard Little

Richard Little

  • 2 Posts
  • 0 Reply Likes
Thank you for the reply. That was my observation even after adjusting ACLs in the ZD. As this was my first time with this scenario I figured I'd put my question out for the community.