M510- How to access the real time GPS location after it was implemented in a moving vehicle.

  • 1
  • Question
  • Updated 2 months ago
Suppose If I implement few of the M510 in the school buses now how would I get the real time GPS location of the buses. From where I am able top get the real time location (GPS).
Photo of Rajiv Kumar

Rajiv Kumar

  • 2 Posts
  • 0 Reply Likes

Posted 2 months ago

  • 1
Photo of Sandeep Gupta

Sandeep Gupta, Employee

  • 25 Posts
  • 10 Reply Likes
This data is transmitted to the Smartzone Controller where you can view the location of M510s.
Photo of Rajiv Kumar

Rajiv Kumar

  • 2 Posts
  • 0 Reply Likes
Thank for the reply. So, I can't get the data If I use this AP as standalone (without connecting to SZ/ vSZ)
Photo of Sandeep Gupta

Sandeep Gupta, Employee

  • 25 Posts
  • 10 Reply Likes
That is my understanding.
In fact, the M510 does not currently run on Standalone Code.  It must connect to a SZ (physical or virtual) to function.
Ruckus Unleashed software (controllerless or 'standalone' but up to 25 devices) support will be released for M510 shortly as well which is another option.  Though I believe in this operation mode GPS data will not flow..  that still requires a SZ.