M510 and Zone configuration (SmartZone)

  • 1
  • Idea
  • Updated 2 years ago
If you try to move an M510 to a Zone with a non-tunnel or non-dhcp/nat SSIDin a WG, you will end up with the error message, that this is not possible (no-tunnel, no-dhcp/nat).
The move is only possible if every SSID is configured with tunnel or dhcp/nat.

Would be nice to be able to move the M510 if there is one SSID with tunnel or DHCP/NAT.
Photo of Harald Thomas

Harald Thomas

  • 9 Posts
  • 3 Reply Likes

Posted 2 years ago

  • 1

Be the first to post a reply!