Lower DHCP lease time utilizing CLI for standalone AP mainly ZF 7363

  • 1
  • Question
  • Updated 2 years ago
I been searching for days, but could not find any answer regarding a CLI for lowering the DHCP lease time for a standalone Ruckus 7363. If anyone could provide some Commands, Thanks in advance.
Photo of Adam Tran

Adam Tran

  • 9 Posts
  • 0 Reply Likes

Posted 2 years ago

  • 1
Photo of Chang

Chang

  • 8 Posts
  • 5 Reply Likes
Hi Adam,
Please check up below command, it's been verified with 100.X version.

Usage: set dhcps {options}
         -> {enable|disable}
         -> iprange <start_ip> <end_ip>
         -> leasetime <90..86400> (in seconds)
         -> example: set dhcps leasetime 90 (please reboot AP to make this take effect!)

You could reduce leasetime 90sec but I do not recommend too much low lease time interval.

Thanks
Chang
Photo of Adam Tran

Adam Tran

  • 9 Posts
  • 0 Reply Likes
thank you so much.