lost contact with ap

  • 1
  • Question
  • Updated 2 years ago
yeah as the title says, you can see the picture below. After i recived the message , aps are refusing to connect with the zonedirector :/ 
Photo of tommy Thomsen

tommy Thomsen

  • 2 Posts
  • 0 Reply Likes

Posted 2 years ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 2098 Posts
  • 295 Reply Likes
I see Heartbeats lost, then lost contact with AP.  Investigate network connectivity between ZD to/from APs.
Photo of Sean

Sean

  • 346 Posts
  • 88 Reply Likes
Is it a centralised or distributed network, if its centralised with remote AP, you may want to check you MTU.

I would set the MTU for AP communication to 1250 for remote AP.
(Edited)
Photo of tommy Thomsen

tommy Thomsen

  • 2 Posts
  • 0 Reply Likes
thank for you help guys, after investigation of network connectivity between zd to aps, i got nothing. But the strange thing happened, all aps auto reconnected after 3 hours down time. And stays stable afterwards.
Photo of Monnat Systems

Monnat Systems, AlphaDog

  • 759 Posts
  • 162 Reply Likes
tommy

i think latency needed (less than 100ms for remote ap connection) got improved.