Logs show hundreds of Eved: STA-DISASSOC-REASON,nimac=

  • 1
  • Question
  • Updated 3 years ago
Does anyone know what these warnings are about?
I get a bunch of theses every few mins
Photo of Smartypants

Smartypants

  • 3 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of Monnat Systems

Monnat Systems, AlphaDog

  • 760 Posts
  • 163 Reply Likes
Hello Steven,

Please paste the entire line. If i assume that the log you are referring to something similar here - https://forums.ruckuswireless.com/ruc...

then it means that wireless is being disconnected or removed from AP by AP due to reason X or Y or Z. this could happen due to many reasons. AP support file may throw some insights into why this may happening plus some background info from you on the site where AP is used, type of devices in use, type of application, potential interference source etc

hope this helps.
Photo of Michael Brado

Michael Brado, Official Rep

  • 2114 Posts
  • 297 Reply Likes
Not to be alarmed. These messages began appearing in 9.6 and 9.7 ZD firmware
and indicate that a client has roamed away. These msgs are most often AP clean up, to clear sessions of users who have left the AP/BSSID.
Photo of Smartypants

Smartypants

  • 3 Posts
  • 0 Reply Likes
Okay...
so the reason I see this "warning" at times 20 to 30 per second is because a user on the network that the 7731 are bridging is doing something?
Photo of Michael Brado

Michael Brado, Official Rep

  • 2114 Posts
  • 297 Reply Likes
If you see these messages on a 7731, please open a ticket with Technical Support so we can take a deeper look. They are normal/expected on ZD managed client APs.