Lennar Connected Home ICX 7150-c12p R510 AP Setup

  • 2
  • Question
  • Updated 4 weeks ago
  • Acknowledged
I purchased a Lennar home with a ICX 7150 and R510 AP.  The wifi signal was broadcasting the Lennar assigned SSID and the ConfigureME-XXXX.  I downloaded the android app and connected to the ConfigureME net and followed the steps.  That's where I'm stuck.  I don't see the SSID I assigned during setup.  I can connect to the AP with Lennar provided password, but I don't get an external IP.  I had an old wireless router and it works, so I know the connection is good thru the modem.  When I go back to the mobile app and try to access the app it says I'm not connected to the network and then takes me to the network settings.  When I did the initial setup with the Unleashed APP, I picked the typical install.

I've done router setup for other manufactures, but this has me stumped.  Can someone point me to the documentation or explain how I can get this configured and maybe explain what I did in the setup with the mobile app?
Photo of james largent

james largent

  • 1 Post
  • 0 Reply Likes

Posted 1 month ago

  • 2
Photo of hayk

hayk

  • 203 Posts
  • 29 Reply Likes
I tend not to use the mobile app since sometimes I tend to have connection issues with the app on iOS. I prefer using the webbrower through a laptop or desktop... have you tried doing that? Are you using the modem/router provided by your broadband provider? If you can find out the IP of the ruckus then you can log into it direct via ip.
Photo of Michael Brado

Michael Brado, Official Rep

  • 3079 Posts
  • 444 Reply Likes
Hi James,

   We've collected some hopefully helpful articles, videos, and documentation for Lennar and our other "Ruckus at Home" customers. 
Please have a look here, and let me know if the KBAs or videos help you find your SSID? 
https://support.ruckuswireless.com/hth-ruckus-at-home