Lennar connected AP's Change of Modem after initial setup

  • 1
  • Question
  • Updated 3 months ago
  • Answered
Hi All,

Amazon tech service guy set up my AP's and the wifi settings initially with the rented modem.
Now I changed my modem and I am not using rented modem any more.When I changed my modem My access points is not getting internet anymore.What settings I have to change in https://unleashed.ruckuswireless.com/  ? 
Do I have to reset and step up the AP's again? Or is there anything in the settings by assigning the new modem IP addrees in https://unleashed.ruckuswireless.com/ --> ip settings?
Please help i ma stuck here from last 14 days.
Photo of hari kumar katamaneni

hari kumar katamaneni

  • 2 Posts
  • 0 Reply Likes

Posted 3 months ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 3288 Posts
  • 520 Reply Likes
If your new ISP modem provides a different DHCP scope to the LAN, then yes, you will need to (factory default) reset your APs and start/create the Unleashed network again, on the new network.
(Edited)
Photo of hari kumar katamaneni

hari kumar katamaneni

  • 2 Posts
  • 0 Reply Likes
Hi.Appreciate your time for replying.Can I know how to reset Ap's Since these are located on the roof.Can we do both the Ap's Reset at ICX-7150 Switch?

What if DHCP is with in the range of the previous configuration?
Photo of Michael Brado

Michael Brado, Official Rep

  • 3286 Posts
  • 518 Reply Likes
Hmm, it's typically by the indented Hard Reset button, but if you can find their IPs in your DHCP lease table, try SSH to them, and issue 'reset factory', 'reboot'...