Is there any way to disable band-steering?

  • 1
  • Question
  • Updated 4 years ago
Is there any way to disable band-steering?

We have a lot of handheld terminals running Windows CE and have constant client connectivity issues whenever we use 5Ghz. I'd rather not remove 5Ghz (current workaround) if I could disable band-steering to see if this is the cause....

Note: This topic was created from a reply on the 5ghz preference topic.
Photo of Chris F

Chris F

  • 2 Posts
  • 0 Reply Likes

Posted 4 years ago

  • 1
Photo of Keith - Pack Leader

Keith - Pack Leader

  • 860 Posts
  • 51 Reply Likes
If you assign each band to it's own SSID (i.e SSID-24, SSID-5 etc) that should do it.
Photo of Bill Burns

Bill Burns, AlphaDog

  • 203 Posts
  • 38 Reply Likes
To keep the same SSID but to disable band steering:
I think you can set the band-steering threshold to zero.

See this thread for some details.
https://forums.ruckuswireless.com/ruc...

Be careful..
It's possible this config change will not persist through a reboot.