Is it possible to controll all AP's after a wireless bridge with zonedirector?

  • 1
  • Question
  • Updated 4 weeks ago
  • Answered
Is it possible to control all Ruckus AP'S after a bridge with the all feaure of Zone director? Here is the configuration



Photo of Ali Sureyya Uz

Ali Sureyya Uz

  • 23 Posts
  • 0 Reply Likes

Posted 4 weeks ago

  • 1
Photo of Albert Pierson

Albert Pierson, Employee

  • 34 Posts
  • 28 Reply Likes
Hi Ali Sureyya Uz,

Yes, the 7731 Point to Point bridge is a transparent extension of the network so the 7782 on the non root bridge side connected to the switch will see the ZD on its wired Ethernet port and will act as a Root AP.  The 7731 link also acts as a Trunk connection forwarding all 802.3q VLAN tags.
 
The Zone Director will be able to manage all the 7982's including the Mesh connected 7782 at the bottom of your diagram.  Unfortunately 7731 point to point bridges are not controllable by the ZD.


I hope this answers your question


Photo of Ali Sureyya Uz

Ali Sureyya Uz

  • 23 Posts
  • 0 Reply Likes
Thank you very much for reply
Photo of Todd

Todd

  • 65 Posts
  • 17 Reply Likes
yes.  I've done it.  Nearly exact same setup.
(Edited)
Photo of Nnamjin Roh

Nnamjin Roh

  • 6 Posts
  • 1 Reply Like
You can think 7731 bridge is wired line.  So this configuration is no problem.