ICX7250-24 Firmware Update

  • 1
  • Question
  • Updated 1 month ago
  • Answered
I have the ICX7250P-24 with the below characteristics: Version 08.0.30hT211, SPS08030h.bin, spz10106.bin and i want to update it to the newest version. 
I have tried with several usb sticks, with TFTP server and with Web Gui but with no success.
Photo of Konstantinos Theodorou

Konstantinos Theodorou

  • 3 Posts
  • 0 Reply Likes

Posted 3 months ago

  • 1
Photo of Ben

Ben, Employee

  • 98 Posts
  • 33 Reply Likes
Hey Konstantinos, 

Since you are upgrading from an old version, you will need to jump to a middle code (8080f). We have also changed the format of our images in newer codestreams; we now use a UFI image. For you, it would look something like this:

While on 8030h the commands will be:

copy tftp flash <ip address of TFTP server> <boot-code-image> boot
copy tftp flash <ip address of TFTP server> <OS-code-image> <primary/secondary>

Example for 8030h > 8080f (assuming switch code and ICX7250)

copy tftp flash spz10114.bin boot
copy tftp flash SPS08080f.bin primary
wr mem
*reload into 8080f*

Once booted to 8080f:

wr mem (this is necessary to ensure your configuration is upgraded as syntax can change)

copy tftp flash <ip address of TFTP server> <UFI-code-image> <primary/secondary>

Example for 8080f > 8092b (assuming switch code and ICX7250 again)

copy tftp flash SPS08092bufi.bin primary
wr mem
*reload into 8092b*

Once you are on 8080f, you can upgrade to any 8090/8092 UFI image.

Let me know if that helps! You can always open a case and we can assist you as well. 
Photo of hamcos


  • 1 Post
  • 0 Reply Likes
Don't we need to upgrade to spz10115.bin boot-code-image before upgrading to SPS08090dufi.bin OS-code-image?