ICX7150 trying to access Ruckus Wireless Device Registrar

  • 1
  • Question
  • Updated 8 months ago

Hi,

ICX 7150-24 version 08.0.80dT211.

There are continuous attempts to access 35.160.244.72 and 52.34.241.9 over 443/tcp via Management interface which seems to be linked to Ruckus Wireless Device Registrar.

What exactly is transmitted and how to disable it?  'no web-management http' is already done.

Thank you.
Photo of Teddy Brewski

Teddy Brewski

  • 2 Posts
  • 0 Reply Likes

Posted 8 months ago

  • 1
Photo of Ryan Guerrero

Ryan Guerrero, Employee

  • 11 Posts
  • 8 Reply Likes
Hi Teddy

you can save your config and
#erase start
#reload

that should stop the continuous attempts to access 35.160.244.72 and 52.34.241.9 over 443/tcp via Management interface.
Photo of Vince

Vince, Employee

  • 13 Posts
  • 15 Reply Likes
Hello,
This is a new feature added since 8.0.80c release and active by default to automatically register the switch to your existing SmartZone. Did you try the "no sz registrar" command?
Regards
Photo of Teddy Brewski

Teddy Brewski

  • 2 Posts
  • 0 Reply Likes
Thanks!
Photo of Martin

Martin, Official Rep

  • 310 Posts
  • 80 Reply Likes
Yep, that is the command, no sz registrar.

The registrar is introduced on request of customers that want to easily let the switch know on which IP or FQDN the management platform is (vSZ/SZ).

With version c it is standard enabled, and with ca, it is standard disabled, with d it is enabled again by default, and you can use the no sz registrar to disable it.

The same system is used on AP's for finding  the controller.

regards
Martin
(Edited)
Photo of Brian Powers

Brian Powers

  • 4 Posts
  • 1 Reply Like
Is there a document on how to setup access to configure the AP registrar?  The URL that I have had saved for quite some time seems to want a User ID and API key (https://ap-registrar.ruckuswireless.com/client/login) - but no where have I ever been able to locate instructions on how to leverage it.

Thanks!

Photo of Martin

Martin, Official Rep

  • 310 Posts
  • 80 Reply Likes
Hi Brian,

To have access to the AP/SW Registrar please contact your Ruckus Sales Engineer as he will explain how the registrar works and can arrange access if approved.

regards
Martin
Photo of Simon

Simon, Employee

  • 53 Posts
  • 17 Reply Likes
It can be disabled with the command no sz registrar sw-registrar.ruckuswireless.com   more details are in the command reference guide