Hi everyone,
My ZD 3000 was connected with 50 AP ZF 7372. It was not stable. When i check the debug log i found out following. Please suggest me what those mean and how can i fix it.
--------------
Aug 23 18:42:29
WLC01 syslog: eventd_to_syslog():AP[[email protected]:5d:93:3c:1f:a0] detects interference on radio [11g/n] and switches from channel [7] to channel [9].
Aug 24 07:55:19 WLC01 syslog: eventd_to_syslog():AP[[email protected]:5d:93:3c:1f:a0] heartbeats lost
Aug 24 08:15:07 WLC01 syslog: eventd_to_syslog():Lost contact with AP[[email protected]:5d:93:3c:1f:a0]
Aug 24 08:19:21 WLC01 syslog: eventd_to_syslog():AP[[email protected]:5d:93:3c:1f:a0] joins with uptime [67] s and last disconnected reason [AP Restart : power cycle]
Aug 24 08:19:24 WLC01 syslog: eventd_to_syslog():AP[[email protected]:5d:93:3c:1f:a0] cold boot successfully
Aug 24 08:19:24 WLC01 syslog: eventd_to_syslog():AP[2c:5d:93:3c:1f:a0] is online.
Aug 24 08:35:15 WLC01 syslog: eventd_to_syslog():AP[[email protected]:5d:93:3c:1f:a0] heartbeats lost
Aug 24 08:35:40 WLC01 syslog: eventd_to_syslog():AP[[email protected]:5d:93:3c:1f:a0] joins with uptime [67] s and last disconnected reason [AP Restart : power cycle]
---------------------------------
My ZD 3000 was connected with 50 AP ZF 7372. It was not stable. When i check the debug log i found out following. Please suggest me what those mean and how can i fix it.
--------------
Aug 23 18:42:29
WLC01 syslog: eventd_to_syslog():AP[[email protected]:5d:93:3c:1f:a0] detects interference on radio [11g/n] and switches from channel [7] to channel [9].
Aug 24 07:55:19 WLC01 syslog: eventd_to_syslog():AP[[email protected]:5d:93:3c:1f:a0] heartbeats lost
Aug 24 08:15:07 WLC01 syslog: eventd_to_syslog():Lost contact with AP[[email protected]:5d:93:3c:1f:a0]
Aug 24 08:19:21 WLC01 syslog: eventd_to_syslog():AP[[email protected]:5d:93:3c:1f:a0] joins with uptime [67] s and last disconnected reason [AP Restart : power cycle]
Aug 24 08:19:24 WLC01 syslog: eventd_to_syslog():AP[[email protected]:5d:93:3c:1f:a0] cold boot successfully
Aug 24 08:19:24 WLC01 syslog: eventd_to_syslog():AP[2c:5d:93:3c:1f:a0] is online.
Aug 24 08:35:15 WLC01 syslog: eventd_to_syslog():AP[[email protected]:5d:93:3c:1f:a0] heartbeats lost
Aug 24 08:35:40 WLC01 syslog: eventd_to_syslog():AP[[email protected]:5d:93:3c:1f:a0] joins with uptime [67] s and last disconnected reason [AP Restart : power cycle]
---------------------------------
Posted 4 years ago
Andrea Coppini, Employee
Andrea Coppini, Employee
That is impossible, you might be pinging the wrong IP. The AP rebooted so there had to be a minute or so of disconnection for sure.
As I said, if it's powered by POE, check the logs of the switch and also test the cable. Make sure it's not longer than 60m if CAT5/E or 80m if CAT6
As I said, if it's powered by POE, check the logs of the switch and also test the cable. Make sure it's not longer than 60m if CAT5/E or 80m if CAT6
A 802.3af PoE port delivers 15.4W and is meant to be able to deliver at least 12.95W of power to the end device.
Also if you are running a longer cable, you can use the Microsemi PoE extender to increase your cable run up to 500m:
http://www.microsemi.com/products/poe-systems/poe-extender
Also if you are running a longer cable, you can use the Microsemi PoE extender to increase your cable run up to 500m:
http://www.microsemi.com/products/poe-systems/poe-extender
